▼

Sunday, 25 October 2026

Can Alexander Turn Me Into A Designer?

One Way Or Another by Alexander Magyarics
At the Assisi IPP I spent quite a long time on one particular puzzle and got absolutely nowhere despite it looking like an apparently straightforward idea. Now obviously, if it was good enough to be allowed into the design competition then it had to be significantly better than straightforward. At the time, I had absolutely no idea who deigned it or even who made it but the original version was crafted from beautiful wooden pieces which is like silver to a magpie for me. Lots of people seemed to be solving it and enjoying their Aha! moments but not me. 

I was delighted to discover that this fabulous challenge had been designed by my friend and puzzle savant, Alexander Magyarics. Of course, at the puzzle party itself, I could not resist and bought a copy direct from Alexander. It's not wood but it has been beautifully 3D printed with a very nice set of textured pieces which makes sliding them around in the tray with a fingertip much easier than had it been smooth. Later, when the competition results were announced Alexander was hugely delighted to see his puzzle get awarded a prize in the Jury Honourable Mention section. To achieve a prize from the incredible puzzlers on that jury is an amazing feat as they are very discerning.

I have been playing with my copy on and off ever since I got home. The aim is to take the single L Triomino and 3 Tetrominoes and place them in the tray with the single disk in one corner. Yep! That's easy peasy - there's lots of space. But then, having placed the pieces, the aim is to be able to slide them around in the tray until you have moved the disk into the diagonally opposite corner. There are 4 empty spaces in the tray so this should be relatively easy? Right? Erm...no! As you can see from the photo above none of the pieces are able to move apart from the disk so that's not going to work. Try again!

What this means is that we have two puzzles in one - first design your puzzle and then work out the sequence to move the pieces until the required diagonal placement has been achieved. The thing about this challenge is that having no linear pieces seems to make them block each other very quickly. I have found lots of configurations where a few moves are possible. I have found quite a few placements where  there seems to be plenty of initial movement possible but it quickly gets blocked up after that. I have even found quite a number of antislide positions where nothing can move at all! What I haven't managed to find is any kind of placement where I can move anything more than 5 or 6 moves. I have never been very good at sliding piece puzzles but have usually eventually solved them (even if it took many more moves than it should have) but I have absolutely no design talent in me at all. Unfortunately for me, the design component is an absolutely key feature to this challenge! I have been at it for many hours and of course cannot keep track of what I have tried so have probably done the same thing hundreds of times. Ken apparently solved it relatively quickly but then he is a MUCH better puzzler than me and is quite good at design.

At one point, I did think to myself: "self, maybe you should try using Burrtools!"

Now, I am quite good at using BT to solve puzzles after so many years of practice but I have realised that I have absolutely no idea how to enter this into the program. Obviously it is easy to put the pieces in but I don't know how to get it to transform from one shape to another. It may be that BT is not the right tool to use but it was sobering to realise that Alexander had probably done all this in his head! There is very little in my head and I am quite envious of people who store stuff in theirs. Mrs S may say that having puzzles in your head is a waste of space but at least it is something in there. My head is full of nothing but leaves and whimsy and a very odd whispering noise which won't go away.

This puzzle is very portable so I will be carrying it with me for a good while and hopefully someone at work will be able to solve it even if I never manage it.

To answer the question of the title of the post... NO, Alexander cannot turn me into a designer! Not yet anyway.😱

If you would like a copy then you should be able to contact Alexander or buy it from Greg. Brian Menold made the original design competition version and has some left for sale on his site.



UPDATE 30 minutes later:

I have had a final Aha! moment and solved the puzzle - wow! That is really good. Why did that take me so long? I have to heartily agree with the Jury - it is definitely an honourable mention winner. Thank you Alexander!


Sunday, 18 October 2026

A Well-earned Special Winner

Elbow Room by Goh Pit Khiam
Goh Pit Khiam has figured quite a bit on this site over the years. He's very prolific but not just someone who exhaustively creates Burrtools assembly puzzles. He has a very odd brain that finds things that are clever and interesting. This week's puzzle is something very special.

Elbow room was a huge hit in the IPP design competition. In fact, it was considered so so good that it won a special award - something I have never seen before. The Jury gave it their Grand Prize and the Puzzlers voted it as their favourite from all the puzzles in the design competition. Together, this meant that it was awarded the "Puzzle of the Year" award - this is something I have never seen before and it is absolutely well deserved. It was my number one puzzle which I voted for and that is quite something because the field was so strong. I have already seen that several people liked it so much that they have created their own 3D printed versions. I really wanted to get it in wood - that way I would have a fantastic puzzle to torture people with and a wonderful wood object to go on display.

I had my suspicions about who had made it but wasn't certain until the day of the announcement of the winners. and literally as soon as it was confirmed as the winner and the craftsman revealed, I sent an email to Tom Lensch from the IPP dinner. It was so good that I couldn't even wait until after the dinner had finished! Tom responded pretty quickly and put me on the list for when he had made them. I must have reached the front of a long queue last week as I got an email asking to confirm my address and requesting a little PayPal transfer. The hop over the pond seemed to be exceptionally fast this time and just a few days later Mrs S was frowning at me for yet another delivery. She really shouldn't complain - I have slowed down my buying considerably this year!

The puzzle was nicely packed and I quickly revealed a nice chunky box made from Cherry with a single Voxel hole in the corner and Tom's mark on the inside. The blocks are a beautifully grained Sapele. There are 2 pieces with an extension on one side and a slot to take the extension and 2 pieces with just slots only. Finally there is a single square cotton-reel type piece which can join two slots. The aim, clearly is to place all the 4 pieces together inside the box as a 2x2x2 cube. However this is only possible if it is done as a sliding pre-linked snake assembly that transforms into a cube during the insertion.

Make an assembly to slide in - NOT like this!
Just the very idea of doing that is something that kept me going in the competition area. There is something very tactile about these pieces and making different shaped snakes of linked pieces that keep failing to be able to be inserted through the orifice was quite compulsive.

I think I must have spent a good 30-45 minutes being laughed at by various puzzlers when I kept failing but they also encouraged me to keep going.

Initially, I was just creating random assemblies and failing but after a while, I actually had to start think©ing about what I was trying and the logic gradually dawned on me. Finally I had my assembly and received a small cheer from puzzlers nearby. The IPP is great (just like the MPP) for having fun poked at you, receiving support when needed as well as cheers when earned. It felt great and due to the elegance of it, I had to keep it as my number one. My number two was the Step by Step by Yavuz Demirrhan because it was also a clever packing puzzle with an unusual twist to it. Elbow room won out for me because of its sheer elegance.

When I received my own copy, I had to play straight away and it was just as difficult several months later despite having been solved by me in the past. I spent a little while trying random things before my logical thoughts from June came back and I proceeded to work on it systematically. It didn't take quite as long this second time but was just as enjoyable.

This was sooooo good!
If you get a chance to work on this then jump at it - it is literally one of the best puzzles of the year. It is so simple in idea and yet so tough and logical to solve. The wood version is certainly the best but even a 3D printed one should be fun.

Thank you Tom.


It's arrived! Hooray.

Safe 2 from Pelikan design
Jakub and team had not managed to get the Safe 2 SD puzzle ready in time for the last release. Mine arrived on Thursday and so far I have found my first tool and managed to use it make things happen inside. I have no idea what it has done but there's some significant movement going on. I can also undo what I move but then gotten no further. 

It is still not yet up for sale but preorders are open if you contact Jakub. 

From my previous posts, the Frau L. and one version of Loach Bed is sold out but the rest are still available as I type so you should have a look before they sell out.


Sunday, 11 October 2026

Mrs S Meets Frau L.

Upcoming puzzles from Pelikan
Last week I reviewed the "easier" of the puzzles from the upcoming release from Jakub and Jaroslav's Pelikan puzzles. That was despite one of Lucie's puzzles being anything but easy! Today I focus on a week of fiddling with the results of Dr Volker Latussek's warped mind. These are really not easy!

Frau L.
Frau L. arrives with all but one piece in the hinged box
This incredible puzzle is yet another follow up to Hajime Katsumoto's Penta in a box. In the summer Volker continued Hajime-san's amazing thoughts about packing pieces into a hinged box by making the pieces 3D and a subset of the Fatomino group with his very fun puzzle that he named Fatomino. It was a hugely fun puzzle and really makes you think about what adding a rotational entry into a 3x3x3 box does. I loved it!

5 rather large pieces to be placed
Of course, Volker cannot leave a good thought alone and always explores any of his ideas until he reaches a limit of puzzling possibility. This time he decided that ALL of the pieces need to be 3D and none of them planar. This particular puzzle is absolutely gorgeous with a Mahogany box and each of the pieces made from multiple different wood cubes (Acacia, Garapa, Maple, Padauk and Purpleheart). It must have been a real pain for the Pelikan team to manufacture these but the end result is very worthwhile. Volker said this about the design process:
When I first tried to fit five FATS into a box with a hinged lid and briefly thought, ‘That’s impossible’, only to then use FATOMINO to demonstrate the wonderful properties the FATS display when combined with the hinged-lid box, I had discovered something astonishing for myself, without being able to put it to use for FATOMINO.
So I had to say goodbye to the FATS and instead fill the 3x3x3 box with any polycubes. I hadn't imagined quite how much of the familiar would remain in the end. For me, it was an exciting journey through the world of polycubes, only to end up packing five pieces back into the box, with a unique solution and a surprisingly low fill rate of less than ninety per cent.
Mrs L. often watched me as I moved the little blocks back and forth on the screen, and on more than one occasion, years later, she opened the corresponding parcel from Pelikan and saw the results. She always shares my delight when something intangible turns into something tangible.
With FATOMINO, it was the box with the hinged lid that she kept opening and closing. Perhaps it was the memory of her childhood jewellery box that made her so happy. It certainly wasn’t the FATS. For FRAU L., I’d only asked her briefly what sort of wood a jewellery box ought to be made of. Mahogany, obviously. With the polycubes for FRAU L., Pelikan had enquired whether the individual voxels really did need to be made from different types of wood. Yes, absolutely. Perhaps the colourful pieces in FRAU L. will help her get over the fact that, apart from LE COLLIER DE TANTE LIESEL and her wedding ring, no jewellery could have filled a jewellery box.
I dedicate FRAU L. to my wife Magdalene, whom I have called Mrs Latussek for almost four decades now, because she finds the name so ugly. It’s lovely that she has stayed with me all the same, and I so very much hope that the name Latussek sounds at least a little pleasant in the world of puzzles.
With FRAU L., I wish all members of the puzzle community a supportive companion for their passion. In particular, from Mrs S..
When I mentioned to Mrs S that this puzzle had been named after Mrs (Frau) L, she thoroughly approved and was amazed that anyone from the community would know enough about her to mention her. Needless to say, Mrs S never ever reads my blog and has absolutely no idea how much she appears in it (if she did there  would be a lot more than a Whack! Ouch!) Mrs S does admire the beauty of the wooden ones but has never had any urge to play with them which is a shame.

The Frau L. puzzle has 24 voxels to fit inside a 27 voxel cube. I initially thought that this might make the puzzle easier with having extra space but in reality this is not the case. The absence of a planar piece really adds to the complexity. I tried creating cubes and then looking at how to recreate the hinge movement that is so delightful with the Fatomino puzzle. There is a requirement to partially fill the main body of the box and leave enough space in the middle layer to allow the top parts to rotate down. The 3Dness of all the pieces caused me a lot of difficulty. I found a couple of nice cube assemblies and looked at all the possible orientations of them to see how they could be dissected into a top and bottom half. Every single one of them either had spaces that were blocked by cubies in front or the front lip of the box. In desperation, I went to Burrtools and realised that this was going to be much more difficult than I thought - there are 26 possible cubic assemblies! OMG!

I spent a whole week exploring them systematically and was getting nowhere at all. In the end I found myself sliding back and forth on the screen amongst the 26 solutions when I noticed a gap adjacent to a piece that I had not been really concentrating on. It was a gap in a very peculiar direction and in retrospect I should have realised that this would be something that Volker's warped mind would seize upon. I duly assembled the cube out of the pieces and explored what movements the special gap might allow - the Aha! moment was amazing! This assembly is similar to the assembly in the Fatomino puzzle but MUCH more! When you see it, you will know what I mean.

This is a glorious puzzle and a very fine extension to the Penta in a box line. Being named after Frau L herself is very fitting - she should be very proud.

Albert
Albert arrives with one piece outside the box
I vividly remember the incredible challenge that was Petit Albert from this time last year! I received a fair bit of correspondence about it. It was an amazing challenge to fit. That puzzle had an L shaped hole in the side of a 3x3x2 box and a bunch of Tetrominos to fit inside. The catch was that rotations were going to be required and the only way to facilitate them was to have curved edges along one side on each of them. Just like the Penta in a box, Volker is unable to let something go - he always explores the very limits of what is possible with any idea that he has - he always wants to make it better or more difficult. He did it this time by increasing the size of the box to a 4x4x2 cavity but having the same L shaped hole on one edge and lengthened most of the tetrominos into pentominos whilst continuing to have the single very tactile curve along the edges. My initial response was horror - I remembered just how tough the precedent puzzle had been and was frightened that this might prove impossible.

Just like the Petit Albert, this puzzle is beautifully made from Oak and Wenge. They will look great on display together. As with most of Volker's creations there is a very particular transport assembly which leaves one piece outside the box. I actually struggled to get the pieces out of the box as they started to rotate and slide about. On top of that there is very little room to get your finger in to direct them. I eventually had the pieces ready for the obligatory photo: 
A triomino, tetromino and 5 pentominos
Looking at the pieces, there appears to be 3 identical shapes and 4 others. The design philosophy behind it was described by Volker:
Some time ago, a sculpture by the Spanish artist Carlos Albert reminded me of a distorted Tetracube. Perhaps that’s not so surprising, considering that Carlos Albert forges his sculptures from solid square steel. I had set myself the task for PETIT ALBERT of integrating as many rotations as possible into a 3x3x2 box - when playing with the distorted Tetracubes, it quickly becomes clear that the absence of some edges enables new rotations - the challenge with ALBERT was to combine the opening of PETIT ALBERT with the 4x4x2 box from my TWISTED-TETRA. I’m always delighted when something new emerges from the interplay of the familiar and new observations, but I’m especially happy when you, like me, discover and enjoy the sometimes-wondrous properties of the pieces as you play with ALBERT - perhaps PETIT ALBERT’s big brother. Of course, using some of my new favourite Pentacubes: The Fats.
As always, the trick is to assemble the packing shape outside the box and see how easy it is to remove the pieces through the required hole. I quickly found a couple of assemblies - the cavity is 32 voxels in volume and there are 32 voxels in the pieces. This is very important as it means that the first pieces to be removed will need to be direct with no rotations. My first shape had no way to remove any pieces at all direct and I quickly moved onto searching for another. It didn't take long - the pieces are all a really nice size and are lovely to play with on a table. I was very encouraged to see that my second shape had the ability to slide 2 pieces straight out through the hole:
Two pieces will come out but so near and yet so far!
Having done this, I looked for the next moves and found that nothing was possible. It was stuck! I was slightly concerned that if there was going to be a huge number of possible assemblies, I might struggle to remember what I had tried. A third assembly allowed the removal of another piece after the first 2 but again I got stuck. I went back to Burrtools to check on how many possible assemblies there might be and was very reassured to see only 7. Time to be systematic...

I quickly found an assembly that would allow me to easily remove 4 pieces and then a fifth with some relatively simple rotations. After that, there were only 2 pieces left to play with - this MUST be the correct assembly so it was time to try it in the box. Oh boy! Working out how to rotate these first 2 pieces into position was a massive challenge. One piece in particular was a huge problem - controlling the movements was very difficult but eventually I managed it with a rather clever and unexpected rotational move. I have never seen a move quite like that one in one of these packing puzzles - very very clever. I finally had my pieces inside and a feeling of huge achievement.

How does this compare with its' little brother? Interestingly, with this one having larger pieces and a larger cavity, the puzzle is more constrained which actually makes it easier to solve but also a LOT more interesting and fun. It is very clever and more accessible than Petit Albert which was extremely tough. If you have the original then you must get this. If you want to try a rotational packing puzzle then this is one of the best of them. Absolutely superb.




Safe 2 coming soon
I mentioned last week that Safe 2 was going to be released soon - it is a sequential discovery puzzle which should interest many of you. The original Safe 1 is still available from Pelikan here and my review is here. You can pre-order the Safe 2 by contacting Jakub by email at info@pelikanpuzzles.eu or using the Contact page on their site


Sunday, 4 October 2026

There's A Loach In The Upcoming Release!

New Releases Coming From Jakub and Jaroslav's Pelikan Puzzles
I have had a little annual leave recently and had to use a lot of it for stuff around the house but was very delighted to receive a new big box o' puzzles from Jakub containing 6 new beauties. I even had some time to start proper work on them. 
We have:
Loach Bed by Osanori Yamamoto (Top 10 Vote getter in the 2026 IPP design competition)
Mirror Tetra X2 by Oasnori Yamamoto
Window 444 by Lucie Pauwels 
Family Puzzle by Lucie Pauwels
Albert by Dr Volker Latussek
Frau L. by Dr Volker Latussek

This week I have solved the first 4 and will be writing about them.

Loach Bed
Loach Bed by Osanori Yamamoto
This wonderful diminutive puzzle was a Top Ten Vote getter in the IPP design competition for a very very good reason. In fact, it was one of the puzzles I voted for myself. A supposedly simple packing puzzle with a limited entry (single voxel) made from leopard wood and 3 bright yellow pieces made from Movingui (it will also be available made from Acacia and Walnut). There are 2 simple rods and an S-shaped piece to be fitted inside the 2x2x3 box so that the entry is left filled.

I remember playing with this in Italy. I remember the beauty, the perfect logic and the marvellous Aha! moment. I then also remember the Oh $3*t moment when I realised that it needed to be solved outside the box in your head first and then the sequence produced from memory completely blind. This makes this puzzle ABSOLUTELY BRILLIANT! The first challenge outside the box is to work out how the S-shaped piece can be inserted and then where the two rods can be placed alongside it and still allow some movement. Then work out a sequence that can allow removal of the pieces. Great! You know what is needed. That took me about 10-15 minutes (I am not terribly bright - I am sure that you will be quicker than that). Then once you know this then insert the pieces inside in the correct order and within a single move of inserting the third piece nothing more can be seen and the rest is done from memory and blind. At this point the careful sequence that you have worked out becomes less obvious and finally you will realise that you need to use gravity for the moves. So rotating the whole puzzle up and down backwards and forwards suddenly makes you question whether you a. can remember where everything is and b. what direction things need to move when the orientation is different to the one that you worked out the sequence.

This picture is not helpful!
The feeling of success is fabulous. Enjoy it...then leave the puzzle for about an hour or so and then with what you know in your head and no real muscle memory left, try and take the pieces out. This again needs to be done blind and can lead to some heart-stopping moments when you have turned it over and about and hoped the required moves have happened but find that a crucial move now won't happen. At this point you need to backtrack without knowing the state of the pieces inside. At one point I got rather badly lost and had to put it down for a bit in a panic. The disassembly is just as challenging as the assembly - there's a reason it won a prize - BRILLIANT!

I would suggest that you do not give this to newbie puzzlers without keeping a close eye on what they do. You could end up with a locked puzzle because you can't see what's going on inside.

Mirror Tetra X2
Mirror Tetra X2 by Osanori-san
This delightful challenge made from Acacia and Padauk arrives as a loosely assembled brick. The aim is to assemble all the attractively symmetrical pieces into a solid 4x4x4 cube with the extra constraint that the cube is formed from 2 mirror coloured halves. 

The puzzle is not hugely difficult but is very compelling to play with. The pieces mostly have tongues or grooves in them (or both) as well as a single 1x2x4 plate and a 2x2x2 cube. Making space for these is both helpful and a hindrance. The most confusing part is the inclusion of two pieces that have a side length of 3 voxels which, for me, made them quite hard to place. Burrtools tells me that there is only one assembly and knowing this, the colour requirement is actually a nice clue as to what you can and cannot do.

It's definitely not a trivial puzzle and actually took me the best part of an hour to assemble it. This is perfect for all levels of puzzler.

Window 444
Window 444 by Lucie Pauwels
Lucie Pauwels always comes up with very interesting challenges and this is no exception. It's a sort of framed jigsaw/packing puzzle made from a whole bunch of gorgeous woods. It arrived like this with all but 2 long pieces in the tray. Once you have tipped all the pieces out you realise that there are 3 different size groups to be inserted - 4 long ones at 5x1 units in size, 4 medium ones at 3x1 units in size and then also four 1x1 pieces. In terms of voxels, with the protrusions and cavities the pieces are considerably more complex and if you were going to put this into Burrtools then you would need a 18x18 voxel grid to do it. But I would advise you - DON'T use Burrtools! There is absolutely no need to do so. This puzzle is wonderfully logical and needs only a little exploration to notice a few critical features which will make you think©. Once you have thunk then the solution needs only a little trial and error and progression happens very quickly. It is very satisfying when you find where pieces need to go. If you make a mistake, it takes a bit of doing to remove the incorrect pieces as they fit together so perfectly (as you'd expect from the Pelikan team) - a small suction cup tool would be very helpful.

This lovely puzzle is another that is perfect for all levels of puzzler - It encourages thought and planning rather than too much trial and error.

Family Puzzle 
Family Puzzle by Lucie Pauwels
Here we have a rather beautiful and very very challenging tray packing puzzle by Lucie Pauwels. It looks much easier than the Window 444 but is a much more difficult puzzle. We have a nice small tray with a cavity measuring 8 voxels high and 15 across. There are 8 rectangular pieces of varying sizes to be placed in the tray and each of them has a single voxel notch punched out of one edge. All the pieces are made from a different rather lovely wood making this a very attractive puzzle to play with. So far so easy - place all these pieces in the tray. There should be plenty of space. 

However, the puzzle is not going to be that easy - Lucie would never let you be that easily successful! On top of the larger pieces there are four 1x2 voxel pieces (mine are a rather lovely Zebrano) which also need to be inserted into the space alongside the bigger pieces. Once all the pieces are in, there will be no holes left. It seemed to me that the obvious thing to do was to insert the bigger pieces and pair up the notches is 4 of them to make space for the small rods. easier said than done. After an hour or so of attempting that, I gave up and just fell back to trying to insert all of the large pieces and ignoring the rods. Even doing that is a challenge as they always seem to fit easily up to the last one:

Not even close on the simple challenge!
After a lot of trial and error I had a crucial Aha! moment which I am sure would occur to you much earlier. After that I was able to get all the large pieces inside but I was a very long way off from getting all the notches lined up. I found quite a lot of possible simpler packings but none allowed me to place all of the rods. I did make a BT file and found that there are 96,608 possible ways to place the large pieces. Time for more thought and more trial and error. I have so far been unable to solve this one so far. BT tells me that there is just a single solution and I have no idea how to go about finding it. 

I think that the better puzzlers out there amongst you will be able to logically approach this and find the solution. Good luck - it's a massive challenge.

Also Coming Very Soon...
Safe 2 by Pelikan Design
Jakub has informed me that he will also be releasing the Safe 2 puzzle soon - I reviewed the Safe 1 here and adored it. This new version is also a sequential discovery puzzle designed by Jakub and team. It is apparently very difficult - Ivan has been working on it for a while and the "Master of puzzle boxes", Peter Hajek, has rated the puzzle box as "good" which is very high praise from him.

There will be 2 versions. The standard version will be €420 and a special version made from Fossil oak (5 copies only) will be €600. If you wish to pre-order then this can be done right now by emailing Jakub and paying a deposit.