Euroka 10x3 from Junichi Yananose |
Up until now I had been very careful and had put it on display in my study
where it forms a sort of shrine to Juno's madness.
It is pretty spectacular with a diameter of 240 mm made from 30 identical
pieces with magnets and a Base. It is gorgeous made from New Guinea Walnut,
PNG Rosewood and Fijian Mahogany. I had intended to leave it on display
indefinitely but...
I have had rather a tough week this week with Mrs S up north , a few evenings
of mild DIY and quite a long week of work (including Saturday). I had
completely failed to find anything useful with Juno's
Dial case and reached this morning without having solved anything at all. Drastic
measures were required and I carefully lifted the Euroka off the windowsill
and into the kitchen for some exploration - maybe this would be a great story
of wonder and success for the blog? Erm......NO!
It started out OK as I removed first one layer and then a second layer of the
pieces came out by just simply tugging them along their axis. I thought to
myself that this was going to be triumph for the blog! Erm......NO!
In the words of the great Captain Mainwaring talking to Private Pike:
You Stupid Boy!
|
|
At this point it felt pretty stable and I threw caution to the wind -
carefully pulled out the first part of the third layer and it held together.
Magnets are truly wonderful things.
This is going really well |
Oh Bugger! |
"Euroka 10x3 is fairly stable once about half the pieces are assembled, but still difficult at the start. Juno himself struggled for nearly an hour to assemble a puzzle prototype without the proper jigs. To solve this issue, we also produced a base that can be used for an assembling jig. With the base, you can assemble the puzzle in less than five minutes if you are familiar with it."
The flip side of the base does indeed have some holes in it to assist with the assembly:
|
|
This failure to assemble puzzles is becoming a bit of a habit here. In fact, I seem to be failing to solve puzzles in general. You should probably ignore my ramblings from now on and just read the other guys stuff instead for real inspiration! Sob!
Right! Back to it. She's not coming back until tomorrow so I do have a bit more time to play. Happy weekend everyone.
I have this exact same situation. I got this one a while ago thinking it looks sooo interesting I couldn't wait to take it apart and put it back together. Now here we are 7 months later and I haven't been brave enough to have a go at it.
ReplyDeleteI have to say reading this article didn't increase my confidence much. Maybe one day when I have the house to myself for a day or two I'll ignore your warnings and attempt it.
Don’t let me put you off! It’s always reassuring to me if others get into similar positions 🤪🤣
DeleteI have not taken mine apart yet. I'm trying to figure out the polyhedron formed by the 30 vertices on the 10 triangles. This might help with reassembly.
ReplyDeleteDo it! Do it! Do it!
DeleteYou lost me when you said that knowing which polyhedron fills the centre! I’m not sure how that would help.
The puzzle box has a small stellated dodecahedron-shaped cavity.
ReplyDeleteIt might be a good idea to make a 3D printed small stellated dodecahedron and use it as an assembly jig.
Juno
That sounds like a wonderful idea Juno, but I’m not allowed a 3D printer. I think I might need access to your solution video. I definitely am getting nowhere putting it back together! 😱
Delete