Some time ago Eric Fuller updated his Cubic Dissection site with some new puzzles and there were a few that I had been looking for having had temptation thrust at me in advance on Facebook. The Bebox was a burr and an N-ary puzzle all rolled into one and (ahem!) maybe one could think of it as a box too. I really wanted one of these because as you well know, I lurve N-ary puzzles and burrs even if I don't (blush) collect boxes. I had been on-call at the hospital the night before Eric went live and his update didn't start until just before midnight UK time. I tried and tried and tried to stay awake for the update but alas, I faded and was unconscious long before the new toys were available!
Maze burr
Eric had made 88 copies in total with at least half had been held back for people who had paid to reserve a copy of one of his boxes (which had been abandoned). By the time I regained consciousness the following morning I was horrified to see that the 2 puzzles I really wanted (this plus the Slant cube) had been totally sold out. I understand that the whole lot of available Beboxes went in under an hour! Luckily when I contacted Eric to see if he might have any left over, he said that if some of the reserved boxes aren't taken then they will be made available within a few weeks. In due course an email arrived offering me one of them and some PayPal flew across the pond. It took quite a while for the UK postal service to deliver but eventually the gorgeousness was mine. The Bebox is gorgeously made from Maple and Walnut and looks rather stunning - it is similar in appearance (if not mechanism) to the incredible MazeBurr.
I had received a few wire puzzles (blogged here and here) at about the same time and was working through them so only had a quick look at the Bebox. By the way if you are interested in those wire puzzles mentioned in the blog posts then they are available just now from Wil Strijbos and it would seem that most are unique to him and will not be available through other stores - so go get them now!
At the end of July, I wrote a little article highliting the most recent wire disentanglements from Jean Claude Constantin. The ones I focussed on were the easiest 3 from that series. I bought my copies from my the wonderful Puzzle Pusher, Wil Strijbos but some of them should be available from PuzzleMaster soon and I am sure that Hendrik will be getting them in stock too. These puzzles are absolutely amazing and relatively cheap so well worth buying even if they may cost you a bruise or two from the inevitable Whack! Ouch! that you spouses may impart. I know that for a while I was covered in bruises and had a mild concussion when she started to hit me with kitchen implements (blunt ones luckily)!
Hi guys, I've had a rather busy weekend at the end of a week of annual leave. My week has been full of household chores (leaving me rather stiff and sore) and then finished off with a special Midlands Puzzle Party in the home town of Dr Simon Nightingale, who has received more IPP design competition trophies than anyone else in history. We had a great time and lots of recent IPP puzzles were shown off and even a magic show was delivered. This has left me with very little time for a blog post so I am delighted that the Mike Desilets, the PuzzleMad roving reporter, has stepped up to the mark and delivered a public service announcement for you.
Aloha Kākou gentle readers,
It’s a rather sad occasion for me as I find myself the bearer of less-than-happy news about a new puzzle that has just hit the market. I actually had some other work underway for Puzzlemad, but a catastrophic puzzling experience this past week has stimulated me to produce this rush job of an article. I’ve rushed it to press because I suspect that there are folks out there with a finger hovering over the “buy” button for this particular puzzle and I wanted to get this information out quickly to facilitate informed decision making. Informed spending, I should say.
Euro Falle 05 - a Siebenstein Spiele production.
The puzzle of which I speak is the very recently released Euro Falle 05, the fourth in a series that seems to have started, oddly, at 02. You can find my review of the earlier Euro Falles here and here if you are new to the blog. With some slight reservations, I have been a fan of the series and was happy to have purchased and played with them. My misgivings were due largely to construction problems. I experienced more of these issues subsequent to the blog reviews, but did not see fit to make an issue of it. However, having plunked down yet more good money for the new Euro Falle 05 and given it a play, I feel I will now have to terminate my relationship with them, effective immediately (Ed - very strong stuff!). Unfortunately, I cannot divulge the exact nature of the deficiency without completely spoiling the puzzle. What I can say is that in the course of two solves of Euro Falle 05 (solved correctly, as designed, I assure you) the puzzle has become completely unusable. As you may know, damaged goods always find their way to me for some reason. I have come to terms with that fact and learned to take it in stride. However, I believe the issue with this puzzle is no fluke. I don’t think I simply got the bad one in the lot. The problem seems to be directly related to the engineering and construction of the puzzle. I could be wrong (I sure hope I am), but I think this is going to be the norm with this puzzle, and I want you to be aware of, at the very least, the potential to have completely wasted your money. Well, I guess you will get to play with it at least once, so not a complete waste, but nearly so.
That’s really the most I can say about it on the front page of Puzzlemad. However, if you already have this puzzle and have solved it (I saw a shot of it on Allard’s blog, amidst his IPP haul, so I assume there are quite a few out there already), or if you don’t intend to buy it anyway, or you do but you don’t care about the solving experience, then click the spoiler button below. Behind that button I show the innards and explain the nature of the problem in excruciating detail, as well as discuss repair options. Again, this will be a complete spoiler, so think it over before you click. Along those same lines, I may spoil other puzzles for you behind that magic button if I feel the need to make comparison with other puzzles and mechanisms. That section is really meant for the serious collector, designer, and/or puzzler who doesn’t mind an unbarred discussion. You’ve been warned!
One other piece of information I think puzzlers should know regarding Euro Falle 05 is that the solution is the same as for another very recently released, and very attractive, puzzle from Siebenstein Spiele. Exactly the same. If you are like me, you don’t really need to have two similar forms of the same puzzle. Or at least when you do, you make the decision consciously, due to some aesthetic or collectability factor. Personally, I was more than a bit disappointed when I discovered these two were functionally the same. And then, to add insult to injury, one of them self-destructed! Know, however, that the ‘other’ puzzle, although having the exact same mechanism, has functioned just fine so far and I am very pleased with it in all respects.
If you have had a different experience with Euro Falle 05, please do register your opinion in the comments below. If for some reason I received the only bad one in the batch, it would be good for everyone to know that and downgrade my dire warnings accordingly. If you are the adventurous type and just have to experience it for yourself, Euro Falle 05 is now up on the shelf at Puzzle-shop.de and, of course, Puzzlemaster.
Well, I am very sorry to write such a bummer of a post. Kevin works hard to keep Puzzlemad upbeat and positive. That’s pretty easy to do with the top-notch (burr pun) puzzles he reviews. But this, too, is part of the puzzling experience. Sometimes stuff doesn’t work the way it’s supposed to. I’m just thankful I have a place to vent about it (Ed - I welcome all types of review and whilst I do try to keep positive, sometimes it is necessary to provide real world experience that may not be as we would wish). But I promise you that my next contribution will be wildly positive (Ed - thank Gawd for that!). In fact, let me say one positive thing right now: the Euro Falle 05, conceptually, is a great puzzle. That’s small comfort if it doesn’t work more than once. But the fact remains, it’s a great idea and it really stumped me for quite a while (I actually solved the ‘other’ puzzle first, so that was where the stumping occurred, but as mentioned, same solution). It is quite tricky and fun, and therefore all the more tragic to write about. There I go again. Ok, I think Kevin should take over from here.... Ed - I guess that is my cue to put one of those javascript hide and reveal buttons just about now....
If you clicked the button, you now find yourself here reading a post-mortem page. Congratulations! If you didn’t mean to click, then for God’s sake avert your eyes. At this point it bears repeating that although Kevin grants me the honor of contributing to Puzzlemad, he is in no way responsible for this particular content other than editing out the foul language (Ed - I have plenty of foul language of my own - I was born in the East End of London!). It’s all on me, baby.
Euro Falle 05 solved and showing it's innards - a very neat idea!
Let’s keep this quick and clinical. The Euro Falle 05 is conceptually brilliant in that it relies, at least to some degree, on a puzzler’s knowledge of the construction and functioning of the prior Euro Falle puzzles. All previous Euro Falle were constructed using fully screwed-down layers of laser-cut wood. The screws were not part of any trick or solution, rather they were perfectly functional in holding the puzzle together. Euro Falle 05 presents the same construction - apparently. But in reality, the screw heads on the front and back are not connected. The structure is actually two separate halves held together at the center with very strong neodymium magnets. To free your 20 cent coin, you simply need to pull hard in opposite directions, perpendicular to the plane of the puzzle (or nearly so, more on that below). If you pull hard enough, the halves separate and your coin falls out. At this point you realize that the one cent coin on the back side was a complete decoy, again playing on expectations from the earlier Euro Falle. Excellent!!
The two halves, showing magnet arrangement. A lot of power for a lttle puzzle
The problem with the puzzle is that, apparently, the magnets that hold the halves together are simply too strong. They are so strong that the adhesives and the (non-existent) surface tension of their holes cannot keep them in place. The magnets would much rather remain with each other than remain part of the puzzle. Upon my first opening of the puzzle, one magnet detached from its spot. I stuck it back in, rejoined the halves, and opened it again. Now I had four detached magnets and one other partially out. In staging the photos for this post, all of the rest came out. Furthermore, one of the back-side false screw heads fell out. These back-side false screws are simply glued in. The front-side screws are actually bound pin-to-screw, thankfully, and quite secure. But the back ones seem to have only a tenuous hold.
Magnets everywhere... except where they should be!
The puzzle doesn't work well in this state.
A screw loose, to say the least!
Analysis: The magnets may simply be too strong for the puzzle. They are very strong indeed. When you don’t have the leverage of the puzzle, and they are just stuck to each other, they are almost impossible to separate. It is clear that glue was used in each hole and its glossy, perfectly smooth surface is clearly visible. If you’ve ever tried to glue two very smooth surfaces, of different materials, you know that the hold will probably be bad. I’ve never had much luck with it. So I think it was a mistake to depend so much on the glue itself. Of course, it does need to be glued, but that alone is insufficient. What is equally or more important is the grip provided by the side-walls of the holes. Good purchase can always be had with a nice tight fit. The fit should ideally be such that you need to tap the item in firmly with a little hammer. They should just barely squeeze into the hole, pressing hard against the wood. Alas, not so with my Euro Falle 05. The holes are, in my opinion, significantly over-bored. The magnets fit loosely in the holes and there is no tension whatsoever holding them to the puzzle. The glue bears all the burden. A good tight fit, with glue, might have held these magnets in. I say might because they are just so darn strong.
I forgot to mention one important aspect of the solution earlier. There are three pairs of magnets holding the puzzle together. Two paired circular magnets and one other pair consisting of a circular magnet and a small, slightly weaker square magnet. All are spaced equidistant around the perimeter. Because of that one slightly weaker magnet, you theoretically should be able to separate the haves with more of a peeling action, opening a gap at the weak corner. I think that’s how it was supposed to function (Ed - how would anyone know which corner to begin peeling in?). But even the smaller magnet is pretty darn strong. The difference between the strong pairs and the weak pair is not really sufficient to make the trick work. Great idea, but as with all other critical elements of the puzzle, poorly engineered. So to sum up the puzzle: great concept, poorly executed. Expecting a dab of glue to hold a metal pin in a significantly larger diameter wooden hole seems particularly egregious. It does not seem that there was much effort expended in field testing these puzzles, if any. It’s hard to believe these issues wouldn’t present themselves pretty quickly.
Repair Options
Very few I'm afraid. The holes are overbored and there is no changing that. I don’t believe they make these magnets in millimeter increments, so it’s unlikely that there is a slightly bigger magnet that one could tap in snuggly. The only option I see is to work the adhesive angle. I think Gorilla glue may provide an option. As I’ve recently learned, Gorilla glue expands as it cures. If one were to carefully apply it in the right quantity, it might bind up and hold the magnet in place. This is risky though, because this glue expands a lot, something like four times its original volume. No Gorilla glue should be put at the base of the hole because there is no room for expansion. The magnet will be forced upward and break the plane of the puzzle surface. This would be fatal since the magnet needs to be flush for the puzzle to close tightly and seamlessly. Application around the sides may work. Any excess will ooze out the top, but can then be cut away. For the screw, same basic deal. I don’t see any other option but heavy duty adhesive. Another option, aside from Gorilla glue, might be some form of epoxy. This would avoid the expansion problem. Far from ideal situation either way, and I’m therefore going to wait a little while to stew on it before I do anything. All suggestions welcome.
Final Comments
In the final analysis, even if all the magnets were secured properly, I still feel this puzzle is a little overpowered. It takes quite an effort to pull this thing apart. So much so that it borders on the puzzler’s bane, “use of force.” (Ed - IT IS VERBOTEN!!) A lot of people will not even be able to get it apart probably. Arthritics need not apply, nor children. I suppose they are not the target audience, but you get my point. The required effort is such that even if you had the genius to guess the solution, it would be perfectly reasonable to conclude you were wrong after moderate effort didn’t open it. It’s a fine line, of course. It has to be tight enough to be secure and not fluked, but I think this puzzle should yield just a tad sooner than it does. That’s just my opinion based on the two times I opened it.
The issue of overpowered magnets has come up in the past. Other good examples are found in one or two of Mr. Strijbos’ puzzles which I think most folks agree have a tad too strong embedded magnets - forgive me Wil, and please don’t take me off your mailing list! That issue, however, is easily fixed (if there is interest, I can explain how in a later post). Euro Falle 05 might not be repairable by the average puzzler. It will certainly be hard to do so without making a mess of things. I nearly ruined my Euro Falle 02 trying to get its magnets back where they belonged. Yes, that’s right, this problem is not restricted to the Euro Falle 05. One of the magnets is currently detached from my Euro Falle 04, for example. I was able to repair the 02 with the aforementioned Gorilla glue and the 04 luckily remains functional as-is. But this fatal flaw is potentially present, to one degree or another, in all puzzles of the series. I now dread playing with any of them.
It's not all bad....
But let’s end this post on a high note! Puzzle Box 001, also brand new from Siebenstein Spiele, is absolutely fantastic! It is quite a beautiful puzzle and functions perfectly. I very highly recommend Puzzle Box 001. It shows the heights that Siebenstein Spiele can reach when they are on their game.
Ed - Thank you Mike for such a detailed exposition about the failings of a very popular puzzle in a great series. I personally do not own any of these puzzles and am very grateful for the warning. It has been said that I very seldom, if ever, post a bad review and this may make you feel that I am in the pocket of the designers and producers. Maybe I have been very lucky or maybe I just choose well but I have very rarely had a problem with any of my purchases. I do tend to not review something if it is less than good but if there is a systematic problem then I will not shy away from informing people of it.
If any other puzzlers feel the urge to post a review as a PuzzleMad roving reporter (good or bad) then please feel free to drop me a line via my Contact page. If English is not your first language then that's not a problem - I edit everything (even Mike's wonderful prose.
When the package arrived from Mineyuki Uyematsu, Mrs S was not amused at yet another delivery of toys for me. My excuse was that 2 of these were VERY special and had been major winners in the IPP design competition. That evening whilst I was balancing beautiful blocks of wood on my sleeping cat's head as I tried to solve them my wife looked pityingly at the cat and sang so you could say that these were "Big in Japan, Alright?" I, of course, couldn't resist it and joined in with her and sang along. Now those of you of a "certain age" will understand my reference in the title - let me say this takes me back to very happy times! Quickly click on play in the video below - go on, you know you want to! Go to 1min 10sec for the best bit!
Did you watch it? Did it bring back memories? Yes, I know, Mrs S and I are completely crackers!
At least twice this year (here and here) I have waxed lyrical about the fantastic collaboration between extraordinary puzzle designer Laszlo Kmolnar and the amazing craftsman Brian Menold. Laszlo has produced a whole series of cubic packing puzzles which look quite simple yet require some very complex thinking because they are not just about randomly rearranging pieces until they fit in the container. Each design has added something special....either rotational moves to orient some of the pieces once inside the container or some very unusual diagonal sliding moves to get the pieces to interlink. The shapes are just "simple" cubes very like the classic Soma cube but with containers that have very constrained (and sometimes multiple) openings for the pieces to be placed through. So not only do you need to find the correct one of a number of possible cube constructions but then you need to work out how to get the pieces through the window(s) and then how to get them facing the correct way. I absolutely adored the ones I had bought so far and despite not being good at packing puzzles, I had managed to solve them all.
I am not sure why the puzzle was called BDSM - I am not really into that scene despite all the Whack! Ouch!'s that I receive but maybe it's because you need to be masochistic to try it?
Last weekend I blogged about 2 of the latest Hanayama cast puzzles which have yet to be generally available outside of Japan. I am sure they will be available from all the usual puzzle suppliers soon. I began my odyssey with the easiest of them (a level 1), the Cast Diamond and decided that it was a fun little puzzle with little challenge for the experienced puzzler but a really nice one to give to friends to watch them attempt. Then I moved on to the hardest of them (level 6 out of 6), the Cast Infinity which I actually found relatively easy but I have been told by other puzzlers that it actually isn't as easy as I think it is and many people may find it a reasonable challenge.
I had seen on Facebook that quite a few puzzlers had really struggled with the supposedly easier challenge of the Cast Cake. The Cake is rated as a level 4 on Hanayama's 6 point scale putting it at the same difficulty level as the Cast Möbius which Mike reviewed for me here. He was not very impressed with it and rated it much easier than a 4 (as would I) and it certainly would not be in the same league as others rated as level 4 like the Cast Marble, Cast Radix, Cast Donuts and others. All of those have been reviewed by me (Marble, Radix, Donuts) and I have thoroughly enjoyed them but consistently thought of them as considerably harder than the level 4 they had been given. I have to say that the Cast Cake also should be rated as a level 5 or maybe 5½. This puzzle was designed by the incredibly talented Bram Cohen who is responsible for quite a few puzzles in my collection, many of which are incredibly challenging.
Todays' post will need to be a quickie....I am on call again today and could be asked to go in to the hospital at any moment and so need to write about something that won't take too long. August has been a bad month for me with the on call rota - I have done the full 2 months worth of on call duties in one month! You would have thought that as the fool that writes the rota, I could avoid that situation but no....most other people have children and so wanted lots of annual leave in August and the only way to fill the 3 rotas and still allow all the requests I had received was for me to do more in that month. I'm getting far too old for all this!
Recently my friend Nigel returned home from the IPP in Japan and brought with him the 3 latest Hanayama cast puzzles for me to play with. After a little PayPal had flitted across the intertubes, my new toys arrived and I decided to try and space them out a bit and not greedily solve them all at once. I have to say that I really liked the new packaging:
Cast Huzzle?
I asked on my Facebook page why Hanayama had called them a Huzzle and got a very interesting response from my Friend Taroh who is a native Japanese speaker:
はずす: (pronounced "huh-zu-su") means 'to take apart' in Japanese, and puzzle is written ぱずる: (pronounced "puh-zu-ru") Hanayama combined the two words together to make up a portmanteau that describes a puzzle you take apart.
At the end of July I showed off on my New additions page a big bunch of puzzles that I had bought from Jakub prior to them being made available for general sale. I have been just soooo busy at work and at home that I have barely had any time to puzzle at all and I am eternally grateful to Mike Desilets for writing a guest blog post for me when I had nothing to write about. I didn't realise that Jakub was holding off putting these puzzles up for sale until I had written a little review for him and you. This is one of the reasons that I get advanced access (I do still pay for them) - he likes me to try them and write something to help you all decide which ones you want in your own collections.
Well this week, Mrs S was off up to Edinburgh to visit the "outlaws" and I was hoping for a little time to play whilst all by myself. This would give me a chance to solve some of these beauties and write something for Jakub too. Despite "she who must be flinched from" being away, I still had little time! She had given me strict instructions and a rather large list of chores to do!! She even left a passing comment that I must not indulge too much in the unhealthy grub that I love and must continue to go to the gym because "if you get fat....then you're out". Gulp! You will be pleased to know that as she is driving back just now, I have done all the chores, tidied the house, cleaned the cat litter tray (Yuk!) and ticked off all items on her list. I have even been to the gym twice to achieve a body "less horrific" because, let's face it, I'll never have a body beautiful!
I now can write reviews of all 7 puzzles - that should shortly be up for sale on Pelikan puzzles' site. To make up for some relatively short blogs recently, this one is rather large...I hope you enjoy it.
Hi everyone, it's been a really busy week for me being on call plus long days then, with my insomnia making me crash in the evenings and having to yet again write the consultant on call rotas yesterday, I have had a week with absolutely no puzzling in it at all! Not a thing...nada! Sob!!! Even Mrs S noticed that I wasn't playing as usual. I am therefore, so grateful to the Puzzlemad roving reporter, Mike Desilets, for producing a wonderful article for me. He always seems to know just when to drop something into my inbox. I'll hand you over to him just now. I am sure I will interject the odd comment now and then.
Historical Shunting designs
(This is a screenshot from Rob Stegmann's extensive page on the subject)
Aloha Kākou readers. Just popping back into the blogosphere for bit. I was originally planning to present Part 2 of the MrPuzzle post - the workshop tour - as my next Puzzlemad hijacking (Ed - I'm waiting with bated breath!). I will do that, eventually, but this past month I was inspired by some other events and research which I’d like to get off my chest. This post is not a straight-up puzzle review, but more along the lines of puzzle advocacy. Specifically, I am advocating for some enterprising designer/builder to fill a notable, and unacceptable, void in the puzzle world - an almost complete absence of mechanical shunting puzzles. It’s an admittedly obscure subset of (I assume) the sequential movement class, but I’ve become utterly fascinated with them over the last few months. If my enthusiasm is even partly transmissible to the community through Puzzlemad, then maybe resurrection of this time-honored puzzle type is possible. Further down I’ll throw out a particularly intriguing design I came across, developed by a notable model railroader.
So how did I come to the conclusion there are not enough (or really any) shunting puzzles out there in the wild? Well, first you have to know how I even became aware of these fascinating puzzles, or rather, reminded of them. Let’s retrace my steps, shall we? Don’t worry, it’s a short trip, and I’ll even throw in some pictures to keep you occupied. Cue music.....
It all began a few months back when I was out on a run in the neighborhoods near my house. I Have recently reached the age where I can refer to myself as being at a “certain age” (Ed - I got there quite some time ago), I’ve come to the realization that knee joints are not designed to take repetitive impact for long periods and, quite likely, did not even evolve to be useful beyond that “certain age”. That’s a problem for someone who is accustomed to a steady dose of exercise-induced endorphins (Ed - I always thought exercise was bad for you but when Mrs S threatened to chuck me out if I got fat, I took up exercise and lurve those endorphins!). A great solution for me has been running hills. There is hardly any impact running up a hill, and boy will it get your heart rate up fast. On one particular death-run, I crested the summit and paused to enjoy some well-deserved wheezing. While collecting myself for the next go, I casually inspected the ever-present pile of trash by a particular neighbor’s house. I am always fascinated by what people put out on the curb (a professional bent) so I can’t help but look over the pile. Junk, as usual. But one thing catches my eye. This:
My recent splurge of puzzle acquisition has been unfortunate in its timing - I have had some very long stressful days at work and have had to work weekends. This coupled with some home stresses meant that I have had less puzzling time than I wished for. Finally, when I did have time, I just didn't have the brain power and energy for anything really complex. Last week I was really pleased to go back to some more basic puzzles - it required less concentration power but was still a pretty good challenge and was really entertaining too.
The Bubbloid twisty puzzles were designed by Carl Hoff (whom I got to meet at the London IPP) and ever since I saw his announcement of their design on the Twisty Puzzles forum and after he showed off the 3D printed version, I had coveted them. There had been some mention that they solved the same way as the Mosaic cube (and later Oscar's Mosaic cuboid) but I had never managed to acquire either of these and was left to my wistful drooling - I lurve twisty puzzles with different turning mechanisms or different geometries to the usual. Unfortunately the 3D printed versions of these (and Carl's other wonderful designs were just too expensive for me at that time - I had spent rather a lot of money!
It was a delightful surprise to find out at the beginning of July that Calvin Fan (of HKNowstore) had teamed up with Carl to facilitate the mass production of 2 of the Bubbloid cuboid series. They were renamed from Carl's original names and I think for the better as it now describes the dimensions rather than just the overlap. Within just a few weeks of the announcement they were up for sale. I bought mine from my good friend Martin who has opened up his own Twisty puzzle on line store in the UK - his prices are excellent and service is superb! If you want to buy the Bubbloids from him then click here. If you live in the Far East then Calvin's HKNowstore is a good bet.
