Pelikan Summer Release 2025 Part 2

The remainder of the puzzles just released by Pelikan

If you had not been informed by email from Jakub, then you should know that the puzzles from the current release are now up for sale in the Pelikan store. All except the Minima Magnetik and Rising Peaks - Everest are still available. If you still want the Minima Magnetik then you badger  get the version Tye Stahly from the NothingYetDesigns store to make another batch of his version. I don't know whether Pelikan will make any more.

Today's blog is about the remainder of the summer release from Jakub and Jaroslav. I am sure that I can help you spend some more money!

Broken Frame and Window

Broken Frame and Window by Lucie Pauwels

This is yet another tray packing puzzle from the amazing Lucie Pauwels. Except it is not “just” another tray puzzle! Lucie seems to have the unique ability to design these puzzles with something about them that makes them more than trial and error. Jakub obviously is very good at recognising the value of these amongst all the designs that he must see. The Broken Frame and Window is a brilliant, beautiful and challenging logical design. It consists of a complex tray made from Maple (137 x 137mm) with a very specifically shaped gap where the frame should be and then a square hole in the centre (the window). To be fitted in, there are 14 unique pieces made from a deep vibrant Purpleheart.

When I first looked at it, I sort of quailed, thinking that this would be many many hours of trial and error and I have the memory of a demented goldfish so have a huge problem remembering previous patterns that I had tried. However, when I set to playing with it, I quickly realised that this is very much a logic challenge. There are some pieces with very restricted placement choices and a couple of gaps in the frame that have very limited options for which of the pieces can go in them. This made the puzzle much more compelling. 

It still was not easy and took me several hours of play before I reached the point where the frame was filled. Much to my chagrin, I had made one assumption about one of the gaps in the frame and kept trying the wrong approach until exasperation made me think a different way. I am sure this was a deliberate design feature by Lucie meant specifically to trap me! The central window is just a 5x5 square and should be relatively easy to fill once you have worked out which pieces are left over from the frame. The only problem is that there are 5 different ways to fill the frame and only one of them leaves the correct pieces to fill the window. There is still some trial and error but it is great fun!

Coffin-Flop

Coffin-Flop by Dr Volker Latussek

Over the last few years of reviewing the puzzles designed by Volker Latussek, I think the Flop series is my favourite because of the fabulous accessibility and challenge. I had thought that the series had ended but was very gratified to see the Coffin-Flop in the current batch. This one is beautifully made using American Walnut and American Cherry. It is beautifully chunky and consists of three tetracubes and three pentacubes. They are to be fitted into a 70mm across box with a 3x3x3 cavity. The pieces consist of a total of 27 voxels which will completely fill the box with no gaps.

Volker designed this and named it as a tribute to the great Stewart Coffin - there was even a conversation between the two puzzle powerhouses:

"Dear Mr Coffin, when your HALF HOUR was published as a packer at Cubicdissection last year, I myself played with your basic idea of splitting a 3x3x3 into three penta-cubes and three tetra-cubes to add a cube-shaped box with six pieces to my FLOP SERIES. That doesn't work with your HALF HOUR, but there is actually a similar set of six pieces that has nice movements in and out of the box. I wonder if I can call the puzzle COFFIN-FLOP? Pelikan will publish the puzzle.”

STC: "After all these years, what a surprise. I never was very good with names. Often that was the hardest part. I have been so busy with other projects lately that puzzles are now in my past. But they were fun, especially dissections. No opinion on type of wood. I used whatever was available. Keep up the good work.

Stewart Coffin (STC), Massachusetts" 

You know from the beginning that this is going to be a huge challenge of first construction of possible cubes and then finding the single way they can be inserted through the limited opening (less than 2 voxels across). There will be rotations and there will be swearing! In fact there was swearing right from the beginning as the special transport placement of the pieces actually proved a challenge for this puzzler to remove from the box just so that he could get started.

The solution of course requires rotations and also the ability to control rotations deep inside the box with no room to insert your fingers - if you can find a way to control gravity then you will have a significant advantage. If you are one of us normal humans who cannot change the direction of the gravitational field as required then some real dexterity is required.

Yessssss!

Taking it apart and returning it to the transport position is another huge challenge!

I adore these puzzles and was very gratified to solve it after just 2 days of work! If you have any of the previous Flop series then you should buy this one - it is brilliant!

The Real Euklid

The Real Euklid by Dr Volker Latussek

Another incredibly challenging packing puzzle - The Real Euklid has seven cubic and cuboidal pieces to fit in the 9x9x9 box with the usual limited entry at the top. It is rather lovely to look at being made from Mahogany and Wenge - using these woods also gives the puzzle a nice weight.

Yes, Dr Latussek has done it yet again! There is yet another puzzle in his incredible Euklid packing series. This one must be really special because Volker named it as “the REAL Euklid” as if all the previous ones had been fake. Volker wrote the following about this design"

"Finally, we've arrived! After a few wrong turns and some significant misjudgments, such as seemingly unique solutions suddenly turning into double-digit numbers of solutions, I am now proud to present THE REAL EUKLID. The task I set myself over six years ago should now be complete: Find a 9x9x9 cubic box with a centred 5×9 opening and seven different cuboids with an edge length of between 3 and 6 units AND A UNIQUE SOLUTION!

In fact, I changed my design strategy for THE REAL EUKLID. Until now, I have always focused on the most beautiful sequence of movements possible for seven cuboids, but this time I did it the other way around: I let the possible cuboids sink in and saw which sequence they showed me - I tried to take on the role of the solver who wants to discover the designer's idea but initially only sees the pieces. Looking at the cuboids without any preconceived sequence of moves broadened my perspective so much that I was able to complete the task. When I saw the solution for the first time, I couldn't believe that I had achieved my task. I was very sceptical because of my experience with EUKLID. Maybe I didn't want to believe it because I secretly hoped that there was no solution to my task. Overall, I had a great time designing THE REAL EUKLID.

Now take a look at the seven cuboids and the interplay with the box for yourself. Then you too can have a great time with THE REAL EUKLID."

There are at least two in this series that I have still not solved despite going back to them on and off for years now. I would not be surprised if this one joined that group. I have only really had an hour or so to play with this one so far and have not got a clue as yet. These puzzles are not for the faint hearted. All the shapes to be fitted inside have a side length as a multiple of 7mm (21, 28, 35 or 42mm) and the interior is 63mm in all directions - there is a sort of beauty to that and I am sure that knowing it will be a help to some of you but to me - I haven’t got a clue. Good luck to all who buy - it will be a great challenge.

Minima Smiley and Sally

Minima Smiley and Sally by Frederic Boucher

The Minima Smiley puzzle I had reviewed in April was a great puzzle and huge seller for Pelikan. Of course, Frederic did not want to just leave the series with a huge triumph! He had to take it one step (or maybe quite a few steps) further by bringing the Smiley ball back and giving him a girlfriend (and a heart to seal their love) and hence we now have the Minima Smiley and Sally. Oh, and as if that wasn’t enough, the bolt from the last version was still present only bigger - MUCH bigger. This incredible puzzle is a serious challenge which I have still not completed as Jakub puts them on sale. I have retrieved Mr Smiley and found Sally inside but so far have not managed to retrieve her. There is quite a lot of thought required here as well as some considerable dexterity. At the moment I have got Sally trapped into a place that I cannot seem to retrieve her - it will need some thought© and quite a bit more time.

You know you need this one for your collections - it is lovely, it’s a huge challenge and the continuation of the series. No puzzler can truly resist a puzzle series - especially if they are this good.

I am sure that there are some puzzles for you here! There is so much to choose from with puzzles from 3 of the best designers in the world. Get them whilst they are still available.

Pelikan Summer Release 2025

Upcoming Puzzles From Pelikan

Yes, if you have been watching my new stuff page or my FB page then you will have seen that quite a few new toys have arrived at PuzzleMad HQ over the last month or so and Mrs S has become increasingly irritated with me. The camel's back very nearly snapped at the end of last week when I had to admit to her that there might be another delivery from Jakub, Jaroslav and team whilst I was at work last week. My incipient murder was delayed by a plane malfunction in Germany and the promised big box didn't arrive on time. The end result was that it was delayed until last Monday and I was working from home - no there were no knee replacements on the kitchen table! I was doing committee work on the dreaded MS Teams - 😱. The arrival of the box was beautifully timed between meetings and I managed to intercept it and secrete it away before there was an explosion! Phew.

The downside of the delayed flight was that I had much less time to play. I have only managed to solve 4 of the 8 arrivals so far. Hopefully the rest will be ready for next Sunday.

The Bunch 2.2

The Bunch 2.2 by Alfons Eyckmans

This gorgeous cube is another of a long line of amazing interlocking puzzles from the Master, Alfons Eyckmans. I have quite a few of these now, both direct from him, as well as versions from Pelikan and they are always great fun to play with as well as looking fabulous on display. This one is very attractive made from Wenge, Maple and Purpleheart. It is a simpler design than many of the others but this makes for a rather nice exploration and solve. 

My first time dismantling it I found a rather nice rotational shortcut but quickly put the piece that is removed back in the puzzle as I know that Alfons tends not to like rotational solutions. The first piece comes out nice and logically and opens up quite a lot of movement but for a while I was missing the key move that would allow me to progress. It was a nice surprise when I found it and even then the next part was not obvious. The puzzle does reveal the inner locking mechanism and that helps you plan the next few moves. 

It's going to be fun putting this back together

Having disassembled it, then is definitely a fun challenge to scramble the pieces and then reassemble after the memory of the disassembly has faded. Great fun! If you love cuboid interlocking puzzles and Alfons' work interests you then this is a brilliant one for your collection.

Rising Peaks - Everest

Rising Peaks - Everest by Girish Sharma

This is another of Girish Sharma's amazing interlocking cube creations.  Judging from the name Rising Peaks hyphenated with a mountain name, I suspect this is the first in a whole series of these puzzles - I certainly hope so! Beautifully made using Padauk, Wenge, Acacia and Maple, the initial challenge is to separate the pieces from their travel assembly. Maybe I'm not very good at puzzles (it does say that all over my website) but I actually took a good 5 minutes taking it apart. Then obviously you have to assemble them into a 4x4x4 cube using linear moves only. Many puzzlers have moved away from solely linear interlocking puzzles but I still love the standard interlocking puzzles that I first learned about so many years ago from Richard Gain. They provide a wonderful challenge and can be quite tough. This one is absolutely superb. 

From the beginning it is very easy to establish the positions of the 4 pieces but actually assembling them is a tremendous fun challenge. Working out which pieces to use first and which subsequently get inserted is part of the difficulty. There is no obvious order when looking at the shapes and in fact the required order was a bit of a surprise to me. At first it's possible to place any 3 pieces in a promising arrangement but the final one ain't going nowhere! I spent a good 45 minutes trying various arrangements of the first 2/3 pieces before I found a sequence that looked promising - something worthy of Girish' design skills. Once I'd found this start, I thought I was making progress until miraculously a piece fell out unexpectedly - I sort of lost track of what I was doing and ended up back at the beginning. Start again...

Continuing in my search I noticed a possible move that I had missed the first time and that opened up a whole set of dance moves of the pieces in an out around each other. The Pelikan team have made this beautifully tight so the pieces don't flop about and each move has to be made deliberately with the occasional "thwack" as they settle in to place. I had my cube assembled in about an hour. 

There is NO spoiler here - the relative positions of the pieces are really obvious

Having taken my photos, I then struggled to dismantle the puzzle and put it back into the storage/travel position. It's a disassembly challenge as well as an assembly one. I redid it a few hours later and even though I remembered the vague order of the pieces, it still took me quite a while to repeat the process. 

This is another masterpiece of design and manufacture by Girish and Pelikan. If you like interlocking puzzles then this should be high on your shopping list.

Minima Magnetik

Minima Magnetik by Frederic Boucher

My goodness! Is there no end to Frederic's design skills and ideas?? Here we have yet another wonderful puzzle in the now enormous Minima series. I have written extensive reviews of Minima puzzles over the last couple of years and have to admit that this series is one of the single most compelling series I have ever played with. I had thought that Frederic might run out of ideas but there seems to be no sign of it so far. The Pelikan team have made this version using Jatoba and Acacia woods with a bunch of magnets. This amazing design looks so simple until you casually have a play. The usual 2x2x3 box has two entry holes to it and what looks like some finger-holes as well. Anyone looking at these shapes (1x1x2 sticks) with a hole in one end and another at the front will be able to think of quite a few ways to get the pieces inside and think this is simplicity itself. I sort of thought so too until I received the instructions.

"First place the box on a flat surface.

Pack the pieces inside su that no magnets are visible through any holes in the box.

Once a piece has been placed in the box, you can not touch or move the pieces with your fingers or move the box"

Ah! Now we have an entirely new challenge! It is a simple packing but made challenging by the constraints. The magnets are obviously the key to manipulating the pieces. To add to the challenge the embedded magnets have their polarity arranged such that 4 of the pieces have one orientation, another the opposite way around and one piece has no magnet. First challenge is to decide which way around the box needs to be placed and then it will be necessary to use both repulsion and attraction to move the pieces around. If the pieces are placed through one hole and another piece placed through the other, then it is quite possible for a diagonal repulsion to occur and another piece placed to prevent this. There is a whole lot of challenge to this one.

I worked out an approach after about half an hour of fiddling out of the box and attempted to do it inside. This taught me that I needed to be very careful with the exact order that pieces need to be placed. I thought I had my solution and took this photo:

No magnets visible but....

Having been unaware that this design was being made by Jakub, I had ordered the same puzzle from Tye Stahly's Nothing Yet Designs store and had actually received his copy a few days earlier (thanks Allard, for forwarding it on to me). 

Minima Magnetik from Tye

I set about doing the same thing with the 3D printed version and, to my horror, it would not work! The repulsion of the magnets was not quite strong enough to achieve one of the crucial moves. This could only mean that my initial solution was not the intended one. It also means that you have two solutions to find if you buy the Pelikan version of this puzzle. I went back to the drawing board and have to shamefully admit that it took me another 2 days to find a solution that would work with both versions. The actual sequence of moves is really quite involved requiring multiple steps. This is a must have puzzle!

Minima Drawer

Minima Drawer by Frederic Boucher

This gorgeous creation is yet another Minima design by Frederic. It is also another of those must have puzzles. This version has been created using a very beautiful Leopard wood and Maple and is stunning. It arrives with the box completely closed and one L shaped piece outside. The drawer of the box can slide in either direction, although on arrival it can will only go one way and reveals a number of pieces inside. It's not straightforward removing all the pieces and requires the drawer to be moved in both directions to progressively release the pieces. Be careful! It's easy to get stuck!

Dowels galore!

Once you have all the pieces, the extent of the challenge becomes clear! There drawer is prevented from coming out by a one voxel dowel attached to the roof of the puzzle inside. There is also another one voxel dowel pointing horizontally inside the drawer. The pieces and extra dowels need to be placed inside the 2x2x3 cavity as usual. Having experienced the minor challenge of removing the pieces from the transport position, I knew that multiple moves would be required and sliding the drawer back and forth. Gravity was going to be a key consideration here. There are a few arrangements that will fit the space given but it is clear that most are not physically possible. The approach here has to be to find an assembly and then work backwards to see whether it can be removed from the box. 

No spoiler - it is solved!

I think I got somewhat lucky and found the solution after only a whole day of trying but on the way I nearly had a heart attack several times. The limited opening means that some of the pieces need to be rotated into the box and if they are not right or in the right order, they must be removed using the same rotation. Sometimes this can be very hard to achieve and leave you with a huge challenge and worry that you have trapped them inside permanently.

This one is a minima for true puzzle professionals - it is fabulous!

I will be working on the remaining 4 puzzles over the upcoming week and will finish the reviews next Sunday.

Did I Just Perform Animal Cruelty?

Tortoise Protocol By Junichi Yananose

Juno Does It Again

I missed out on the Hippo puzzle from Juno which was such a huge hit last year - it dropped at the wrong time for me due to a combination of finances and being too busy to pay proper attention. I was determined not to allow that to happen when the next of his fabulous sequential discovery puzzles dropped. I was poised, logged in and with Apple Pay ready to go. It was just as well that I took these precautions as I have never seen a production run sell out so quickly!

When it arrived, I was rather staggered at the sheer size and heft of it. It is 211 x 162 x 82mm across and weighs in at 870g. The sales spiel had mentioned that it was big and heavy but it really caught me by surprised. It may cause some storage problems but I am not going to think about that until someone who I am frightened of harangues me for leaving it lying around. It is rather stunning being made of PNG Rosewood (shell), Golden Sassafras (body), Silky Oak (limbs and head) as well as Jarrah, Iroko and Juno's often used beautiful plywood. There are also some brass pieces and a whole lot of magnets.

The aim is to find a cavity and a prize somewhere inside. Yes, there's a cavity and NO, it's not a box! The presence of a cavity does not automatically make everything a box. I myself have some cavities within me and I am definitely not a box!

Having received it, photographed it from a number of angles, it was time to torture the Tortoise. It sounds awful but if I was to get my prize from inside then I knew I had to do some awful things. Turning it over and over doesn't really reveal any suspicious noises of anything loose inside and pushing and pulling at limbs and shell does very little. However, if you poke a tortoise on his nose then what will he do? Yes, the obvious thing happens here:

Now you seem me...

Now you don't

After this a few more things are possible and you get to play "Pattycake" with your tortoise and on a few occasions a bit of the internals are briefly visible. I went around in circles for a while moving bits and then moving them back. The moves are rather satisfying and assisted by magnets inside. Up until this point, I was able to go back and forth to the beginning each time but seemed to be missing a critical move to progress. This was where I stopped for the first day.

Returning to it the next day, I used my Einsteinian approach for a bit until something spontaneously different happened - oooooh! Now I really had done something terrible to the poor creature:

That has got to have hurt!

All of a sudden, I could see the innards of a tortoise and just like my own innards, they aren't really intended for the world to see - so I won't be showing them to you! At this point, it's possible to see the sheer complexity of the puzzle and understand why it had taken Juno quite so long to design, perfect and manufacture them. The interior is an absolute masterpiece! Let's just say, more horrors are possible for the poor tortoise including amputatlion of all limbs and tail as well as decapitation. It's gruesome!

Having ripped all appendages off, hopefully to use as tools later, I decided to return it back to the beginning and got my first shock - I couldn't;d not close it up again. I thought I had understood the process but I had missed something and part of the reassembly was blocked. I was flummoxed for a while and was forced to Think© for a bit. Ouch! Eventually I saw through the fiendish design and was able to return to the beginning and leave it for another evening. This was proving to be real fun.

The following day, I quickly tore the tortoise to pieces and examined the interior to see where tools would be used. There were magnets, buttons that were sunken, buttons that were flush, it was beautiful. All you can do is push and prod a few bits to see what happens. Interestingly, you need to combine pushing stuff with specific orientation to make pieces shift inside. Initially, you can see the move but it doesn't seem to help get you any further along. Thinking© again and trying an old old trick reveals a new part of the interior and then brass pieces can be seen sliding around inside. The odd thing is that sometimes those brass things disappear and won't return.......until they do. Why???

I got stuck again at this point. There is an obvious thing to do but it wasn't doing anything until I did it again and it did. It caught me quite by surprise as a component shot out of the tortoise and landed in my lap. Juno did suggest solving this puzzle over a fusion ops folded bath towel and I agree - in the end there are quit a LOT of pieces which could easily be lost down a sofa if you are not careful. Having gotten this piece out, I was able to see a bit more of the interior but it didn't really help me and I was pretty stuck for a day or so. At some point, I must have manipulated a mechanism without realising it because after a couple of days of getting nowhere, I suddenly had a gorgeous piece of plywood in my lap and no idea how. It had quite obviously been held in place by a pin and that pin was nowhere to be seen. I frantically checked my lap, the sofa and the floor and couldn't find the pin. I had no idea where it was and had no way to put it back. Now I had no option but to continue to the end and hope that I would work out how I had achieved that step or I would not be able to reset.

I was able to see why one piece had been disappearing inside and only occasionally reappearing during the early part of the solve. I suddenly had an extra tool and an obvious place to use it. Another beautiful piece of plywood was revealed and I was stuck again. From now on, there was a lot of thinking, a lot of trying random ideas that wouldn't work until in desperation I tried the correct random thing. The progression over another few days was absolutely delightful. There are sliding pieces, magnetic locking mechanisms and even a lever to manipulate (once you have found the lever) and all of a sudden a cavity is found - not the cavity of a box, you understand... it's the cavity of a tortoise. I had my prize!

For some reason, I was expecting a loaf of bread!

This is an absolute Tour de force of puzzling! It is beautiful, well thought out, fabulously logical and worth every penny. It is absolutely certain to be in my next Top Ten(ish) of the year. Whether it makes it to number one depends on whether I manage to solve some of the other incredible puzzles I have received over the last few weeks. The Jukebox, the Moonage M5, the Ice Bucket, Dead Mortimer are all proving impossible for my feeble brain but I do hope that I might manage to solve one or two soon!

Thank you Juno and Yukari for an amazing odyssey!

Does Being Married Decrease Your Solving Ability?

Tortoise Protocol from Juno

Well! That was an inflammatory thing to write as a title! It might earn me a Whack! Ouch! but probably not as she never looks at my site. If one of you rats me out then I'll be very upset with you.

The reason for the title is that I have nothing solved to write about due to a combination of work (catching up after some annual leave has left me little time) and having a better half who insists on decorating the house periodically seems to get in the way of puzzling. Yes, she doesn't make me actually do the decorating but its the moving everything around from room to room and forcing me to tidy up my piles (yes, multiple) of puzzles to be solved gets in the way.

Then, it just happened to be our 31st wedding anniversary yesterday and that involved something really special and really time consuming - kittens! I married a crazy cat lady and we got our first cats 28 years ago in an attempt to prevent the further multiplication of cat pictures, porcelain cats, stone cats etc. It didn't really work very well as they still proliferated but at a slightly slower rate. Our last feline friend died last year and after a little break to get over it she decided (and yes, I did not disagree) that more were required. So, when the most international MPP of the year went ahead, I drove with a happy Mrs S to pick up Amenadiel and Mazikeen (I am sure you can work out where those names came from). I cannot leave much lying around for fear of it being chewed or batted around the kitchen floor and also have been "forced" to spend some time in the company of the crazy cat lady and her cats. It has been quite refreshing.

I have attempted some puzzling and made some progress but not much. My copy of Tortoise Protocol from Juno arrived and I have been working on it. Just as with the Hippo, you have to do some truly awful things to the poor tortoise but progress was being made...until it wasn't. I have found lots of pieces and things that happen but I've been stuck at a critical point for a week. Sigh!

The Clutch lock from Andrew Coles has been in my pile for weeks and weeks - I have made some real progress in that the lock is open - I am not entirely sure why but now it will not lock properly. Actually it will lock but I cannot remove the damn key. He's a devious bugger that Mr Coles as I have mentioned before. Allard has discussed this lock recently and loved it - I am not very bright and hopefully will love it in a year or 3 when I understand it. You should love it soon when he puts them up for sale.

How does being married interfere with this? She got very upset with the constant muttering and the loud click, clunk noises I was making as I repeatedly opened and closed the bloody thing.

The day before our wedding anniversary, a nice compact box arrived from China. It had some puzzles in it that I was hesitant to tell "her" about until she was in a very good mood. My latest batch from Aaron Wang arrived and, GULP, they are noisy jingly things! I'm hoping the cats love the sound and that will give me an excuse to play without being shouted at.

Trumpet

Double-Barre

These two named after musical instruments are "just" level 8 out of 10. I have started with Trumpet yesterday and today and after an hour, I wonder whether Aaron is a superhuman being. These are the easy ones and I still can't do them!

Luckily for me the cats are fascinated by the jingling!

Circuit Board I

Circuit Board II

These two are level 10 and look ferocious. I wasn't going to buy them but Aaron insisted that the solutions were truly something special and I would love them. I am sure he is right but I do not know if I will ever find the solution!

Grenade V

Grenade VI

I have no idea why I bought these! I guess it was to complete the set. I do own the Grenade I - IV as well and as far as I remember have only saved one of them! They are impossibly tough but they really are wonderful to look at. I did have a forlorn hope that maybe without string they might be less impossible? Doh!

French Horn

Galaxy I

Another music themed one but this time level 10 and something that looks like it will be in a knot in no time and with no quick release mechanism that may stay that way. Aargh!

Concertina Wire

Sweet Hug

I absolutely adore these wire puzzles with a base. They tend to be very N-ary but the complexity of the interlocking rings can make these incredibly difficult to follow the solution and I often find myself either hopelessly lost or back at the beginning. Some have some very complex movements which I am never able to find. These looked like the two most straightforward ones from the current batch - I have hope even if it's just a faint one!

Summer in the Xiaoshang Bridge

This is one of a series of four designed by Aaron himself. Looking at the picture, maybe I stand a small chance at solving it despite the level 10!

If you want some of these wire puzzles then some may still be available - contact Aaron via FB or via me.

Hopefully I will have a bit more time and success this week.

Shooting For The Moon With Stephan

Did Houston Or I Have A Problem?

Moonage M5 By Stephan Baumegger

Beautiful Purpleheart launcher

Stephan Baumegger progressed very rapidly a few years ago from a just a hobbyist puzzle designer and wood worker to one of the best in the world. He has been producing some of the most beautiful creations in the Burr, N-ary and Sequential discovery categories that I have ever seen. Each time he reveals a new set of creations on his PuzzleLeisure FB page, I add quite a few to my list and every time, I fail to buy before they sell out because quality doesn't come cheap and by the time I have scraped the money together, it's too late and I have to be aware that I am walking a very wobbly tightrope with Mrs S and if too much arrives in a short time then I am in for a stern talking to and possibly a Whack! Ouch! or three. The Moonage M5 SD puzzle was released for last years IPP in Houston, Texas and entered into the 2024 design competition where it won a prize in the top 10 vote getters section. Looking at the other winners, I can see that it was a VERY good year for puzzling that year. The available copies sold out fairly quickly when it was released for general sale in January - indeed they were all gone on the day of release. After the IPP success that should have been no surprise but I had run out of money at that time and had to pass.

Luckily Stephan knew that I was interested and when he had created a new batch fairly recently, I was offered a copy for a sum that made Mrs S glare at me. Luckily, she has been on a bit of a household stuff spending spree and couldn't really chastise me too much without drawing attention to her own profligacy. Maybe I should try to coincide my puzzle arrivals with her spending in the future?

I got a bit of a shock when I first saw it (someone actually brought it to the last MPP just before my copy arrived). I was expecting it to be beautiful and wasn't disappointed but I hadn't realised quite how big it would be. This Behemoth is 19cm tall, 7.5cm in diameter across the main body and 15cm across the tail fins. It weighs in at about 517g. When it came out of the box I was expecting she who must be feared to take one look at the size of it and land a hefty Whack! Ouch! on me but all she said was that it was very pretty. I haven't tried to put it on display yet but I am not sure whether it will actually fit on my shelves which may be a bit of a problem. I'm not allowed to display puzzles in the living room any more after she had the room decorated and she realised how nice the room looked without a large batch of puzzles on every surface. Sob!

Having found some time to start playing, I realised that there are a few parts that move a little bit but only a little. The Moonage M5 collar can be rotated if the button is pushed in first and the fins sort of wiggle. The purple heart launcher can be rotated a few degrees but that is it. Time for a little thought© and trying to combine what's possible. There are quite a lot of Aha! moments here and all of them lead beautifully from one to another. The important thing is the superb attention to detail from Stephan, when the original Apollo 11 rocket was launched to the moon, the power went in 3 phases. The first part was the jettisoned to release the second stage launcher and Stephan did the same here:

First stage release

Once the launcher has been jettisoned then it is possible to look inside and understand the mechanism properly - it's pretty clever and very precise. In achieving launch you have used 3 important elements - water, oxygen and energy and they are absolutely vital. My usual too and fro method here did cause me a little problem but not one that Houston would have suffered. I put some pieces back into place to try to get back to the beginning and suddenly found that I couldn't then remove one of them. Doh! Maybe I should pay attention to where the magnets were and not get mixed up. Luckily I had a pair of tweezers and with a bit of a struggle I managed to remove the errantly placed tool. I really am not terribly bright!

There are obviously other tools now needed and one is even visible but seemingly not reachable until I thought about what I had done before. After I had "thunk" again, I had my next tool and a place to use it and the second stage rocked was released leaving me with the passenger compartment in the nose cone:

Still not finished

The aim is to take the rocket to the moon and therefore I needed a lunar lander and maybe a bit more. After all, when they reached the moon, they got into their space suits and planted a flag on the surface of the moon. Releasing the next items was a fun odyssey. The mechanisms are varied and clever - every single step is beautiful with such attention to detail from the designer. I landed on the moon and took my photo which I have hidden behind a spoiler button. It really isn't a spoiler but if you don't want to see what the ultimate aim is then don't click it.

One small step for man!
Lunar lander, spaceman, US flag on the moon

That was a real fun challenge. Not too hard and only a couple of times when I had a small heart attack. Then it was time to reset the puzzle and, Houston, I had a problem! I had not paid full attention to how everything came apart and when I started to reassemble it I found that part of it wouldn't go together properly which was going to prevent the rest fitting. Aargh! Panic ensued and after a frantic opening and closing of parts that I had done it made me look very closely at the construction. I had missed noticing a critical part of the design and once I realised and a quick fiddle to get things correctly aligned, I was then able to put it all back together and admire the beauty of it all.

It wasn't cheap but, my goodness, it's beautiful and once I have found a place to put it, it will look beautiful on display. If you get a chance to play with one then enjoy. If you get a chance to buy a copy then jump at the chance, you won't regret it.