Great Puzzling Comes in Twelves!

Time For More From Pelikan

Minima puzzles no 5 to 12

Number 1 to 4

It was only a month ago that I wrote about the last release from Jakub, Jaroslav and team's Pelikan puzzles. At that time they had beautifully reproduced the first 4 in the Minima series designed by the incredible Frederic Boucher. This time the next 8 are here in yet another gorgeous selection of woods and you really need to add them to your collection. The four from the last release that I have written about are still available as individual puzzles or a set of four. There is a Minima 13 but only so far only released by Frederic himself and Tye Stahly) it is possible that will also become available in the future as well.

From Nothingyetdesigns

Original from Frederic XIII

If they are going to be released like the last set then they should be in sets of four as well as single puzzles. The wood choices are perfect:

Minima 5 - Limba and Bubinga

Minima 6 - Ash and Ovangkol

Minima 7 - Wenge and Maple

Minima 8 - Ovangkol and Zebrano

Minima 9 - Acacia, Padauk and Wenge

Minima 10 - Zebrano, Purpleheart and Maple

Minima 11 - Merbau and Padauk

Minima 12 - Bubinga and Acacia

Obviously, like the rest of the Minima puzzles, the aim is to pack the pieces into the box and leave it so that no gaps are visible through either the large holes, small finger holes or slots that facilitate rotational moves (if the number of voxels is less than the 12 that would completely fill the box). Continuing with the pathway that the first four took, these get progressively more difficult but are always very fun to solve. The rotations are beautifully facilitated by the various holes and slots cut into the box and no force is needed. Some of the rotations are really quite tricky to work out and in several puzzles there are multiple rotations for one piece. As before, the wooden box makes the challenge much more difficult as you cannot see what is happening inside once a piece or two have been placed. I had not managed to solve Minima 8 in the acrylic box version despite months of trying after receiving them in September last year. Minima 8 doesn't look like too much of a challenge with 3 simple L-shaped tri-ominos and a single 3 voxel straight stick but there I had huge problems with it and was gratified when a couple of correspondents agreed that it was a really difficult puzzle.

Minima 9 and 10 are slightly different having pieces of 2 colours and whilst packing is the aim, the difference is that with Minima 9 the puzzler has to place them so that only one of the colours is visible through the holes in the box (for that one there are 2 solutions - one for each colour). Interestingly, I found one colour quite a bit harder than the other. Minima 10 has only one solution and needs to have only the vibrant Purpleheart visible from outside of the box. Minima 11 and 12 are very deceptive having relatively simple pieces and quite a lot of large holes in the box but they are also a huge challenge - almost as difficult as number 8. They both took me 2 or 3 days to solve but at least not the several months of the former. 

These puzzles are so much fun and this explains why I have a HUGE collection of these Minima puzzles of varying types and from various designers. Basically I will purchase any of them when released to add to my collection. I would say that these are ESSENTIAL purchases for anyone seriously into packing puzzles - they are stunningly beautiful and a fabulous challenge and the Pelikan team have made them so well!

---

Empire

Empire by Jorgos Anastasou

Bottom view

The other puzzle being released by Pelikan alongside the 8 Minimas is the Empire burr by Jorgos Anastasou. This beautiful and complex 11 piece burr is presented as a rather dense block structure with a sort of dome on the top as would be seen on an emperor's palace. It has been made with a lovely set of woods (Padauk, Wenge, Acacia, Purpleheart and Maple for the vertical sticks forming the dome and a very warm Cherry for the walls). The first move is very well hidden partly because the pieces are quite snug and it required a good bit of pushing, prodding and pulling to find what could move. Once you have found the first move then it is quite quick to remove the first piece (there are just 5 moves required to separate it from the puzzle) but removing the next piece will prove a considerable challenge. It is only another 7 moves but finding the correct ones was very difficult for me. I went round and around in circles for a long time failing to find a critical move until I found it quite by accident. Unfortunately I did not notice what I had done until I realised that new positions were available to me and I was completely unable to backtrack! After a good half-hour of trying to return to the start, I gave up and continued with the disassembly which was great fun as it remains pretty stable right to the end. The final disassembly level is 5.7.1.2.3.2.2.2.1.2 which doesn't look terribly challenging but for me it is just right!

Reassembly required me to have a lot of fun with Burrtools but I think that those of you who remembered your pathway might manage without it and the genii amongst you might just manage to put it together from scratch. 

Jorgos is really designing some fantastic puzzles and I am so pleased that Jakub is agreeing to make them available to us in such fancy woods. This one will look stunning on display in your collection.